createJuelichSetup1.C

Go to the documentation of this file.

        // Tracking station for the MVD of PANDA
        // Setup Nr. 1 used in Beamtime Feb/02 to Feb/06/2010
        // setup was used at Feb/02 and from Feb/04 until Feb/06
        
        // Simone Bianco 15/12/2009
        
        {
          // Sizes of the detectors
         
          // Detectors defined as TGeoBBoxes, so the following kDx,kDy and kDz
          // are half of the real sizes of the boxes
        
          const Double_t  kDx  = 0.96;   // in cm!!
          const Double_t  kDy  = 0.96;   // in cm!!
          const Double_t  kDz  = 0.015;   // in cm!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
        
          // Positions of the detector
        
          // Sensors displaced along z, laying on perpendicular xy plane,
          // there centered in (0,0)
        
          // 2 double sided sensors
        
          const Double_t  kPos1    = 11.0; // (cm) Box 1
          const Double_t  kPos2    = 183.2; // (cm) Box 4
        
          // single sided sensors
          // this is the position of the center of the system
          // containing the two single sides detectors
        
          const Double_t  kPos3    = 80.7; // (cm) Box 2
          const Double_t  kPos4    = 139.0; // (cm) Box 3
         
          // Gap between the two single sided sensors
        
          const Double_t  kGap3    = 0.45; // (cm)
          const Double_t  kGap4    = 0.45; // (cm)
        
          // positional corrections (displacement) of each sensor
          // these values are obtained by the software alignment procedure
          const Double_t offs1x = 0.;
          const Double_t offs1y = 0.;
          
          const Double_t offs2x = 0.;
          const Double_t offs2y = 0.;

          const Double_t offs3x = -0.1698;
          const Double_t offs3y = -0.1658;

          const Double_t offs4x = -0.0366;
          const Double_t offs4y = -0.1855;

        
          //##################################################
        
        
          gROOT->Macro("$VMCWORKDIR/gconfig/rootlogon.C");
         
          // Load this libraries
          gSystem->Load("libGeoBase");
          gSystem->Load("libParBase");
          gSystem->Load("libBase");
          gSystem->Load("libPndData");
          gSystem->Load("libPassive");
         
          TString outfile= "TrackingStation.root";
          //TFile* fi = new TFile(outfile,"RECREATE"); 
         
          FairGeoLoader* geoLoad = new FairGeoLoader("TGeo","FairGeoLoader");
          FairGeoInterface *geoFace = geoLoad->getGeoInterface();
          geoFace->setMediaFile("../../../geometry/media_pnd.geo");
          geoFace->readMedia();
          geoFace->print();
        
          //##################################################
        
          FairGeoMedia *Media =  geoFace->getMedia();
          FairGeoBuilder *geobuild=geoLoad->getGeoBuilder();
        
          FairGeoMedium *CbmMediumAir  = Media->getMedium("air");
          FairGeoMedium *CbmMediumSilicon = Media->getMedium("silicon");
         
          Int_t nmed=geobuild->createMedium(CbmMediumAir);
          nmed=geobuild->createMedium(CbmMediumSilicon);
        
          TGeoManager* gGeoMan = (TGeoManager*)gROOT->FindObject("FAIRGeom");
        
          TGeoVolume *top = new TGeoVolumeAssembly("TS");
                           
          gGeoMan->SetTopVolume(top);
         
          TGeoShape *BoxDouble1 = new TGeoBBox("StripActiveTD1", kDx, kDy, kDz);
          TGeoShape *BoxDouble2 = new TGeoBBox("StripActiveTD2", kDx, kDy, kDz);
          TGeoShape *BoxSingle1 = new TGeoBBox("StripActiveTS1", kDx, kDy, kDz);
          TGeoShape *BoxSingle2 = new TGeoBBox("StripActiveTS2", kDx, kDy, kDz);
          TGeoShape *BoxSingle3 = new TGeoBBox("StripActiveTS3", kDx, kDy, kDz);
          TGeoShape *BoxSingle4 = new TGeoBBox("StripActiveTS4", kDx, kDy, kDz);
         
          TGeoVolume* BoxVolDouble1 = new TGeoVolume("StripActiveTD1",BoxDouble1,gGeoMan->GetMedium("silicon"));
          TGeoVolume* BoxVolDouble2 = new TGeoVolume("StripActiveTD2",BoxDouble2,gGeoMan->GetMedium("silicon"));
          TGeoVolume* BoxVolSingle3a = new TGeoVolume("StripActiveTS3a",BoxSingle1,gGeoMan->GetMedium("silicon"));
          TGeoVolume* BoxVolSingle3b = new TGeoVolume("StripActiveTS3b",BoxSingle2,gGeoMan->GetMedium("silicon"));
          TGeoVolume* BoxVolSingle4a = new TGeoVolume("StripActiveTS4a",BoxSingle3,gGeoMan->GetMedium("silicon"));
          TGeoVolume* BoxVolSingle4b = new TGeoVolume("StripActiveTS4b",BoxSingle4,gGeoMan->GetMedium("silicon"));
        
        
          TGeoTranslation* trt1 = new TGeoTranslation(offs1x,offs1y,kPos1);
          TGeoTranslation* trt2 = new TGeoTranslation(offs2x,offs2y,kPos2);
          TGeoTranslation* trt3a = new TGeoTranslation(offs3x,offs3y,kPos3 - 0.5*kGap3 - kDz/2.);
          TGeoTranslation* trt3b = new TGeoTranslation(offs3x,offs3y,kPos3 + 0.5*kGap3 + kDz/2.);
          TGeoTranslation* trt4a = new TGeoTranslation(offs4x,offs4y,kPos4 - 0.5*kGap4 - kDz/2.);
          TGeoTranslation* trt4b = new TGeoTranslation(offs4x,offs4y,kPos4 + 0.5*kGap4 + kDz/2.);
        
          TGeoRotation* dummyrot = new TGeoRotation();
          TGeoRotation* rot1 = new TGeoRotation("",90.,0.,0.);
        
          TGeoCombiTrans* trc1= new TGeoCombiTrans(*trt1,*dummyrot);
          trc1->SetName("Sensor1");
          trc1->RegisterYourself();
         
          TGeoCombiTrans* trc2= new TGeoCombiTrans(*trt2,*dummyrot);
          trc2->SetName("Sensor2");
          trc2->RegisterYourself();
        
          TGeoCombiTrans* trc3a= new TGeoCombiTrans(*trt3a,*dummyrot);
          trc3a->SetName("Sensor3a");
          trc3a->RegisterYourself();
        
          //  TGeoCombiTrans* trc3b= new TGeoCombiTrans(*trt3b,*dummyrot);
          TGeoCombiTrans* trc3b= new TGeoCombiTrans(*trt3b,*rot1);
          trc3b->SetName("Sensor3b");
          trc3b->RegisterYourself();
        
          TGeoCombiTrans* trc4a= new TGeoCombiTrans(*trt4a,*dummyrot);
          trc4a->SetName("Sensor4a");
          trc4a->RegisterYourself();
        
          //  TGeoCombiTrans* trc4b= new TGeoCombiTrans(*trt4b,*dummyrot);
          TGeoCombiTrans* trc4b= new TGeoCombiTrans(*trt4b,*rot1);
          trc4b->SetName("Sensor4b");
          trc4b->RegisterYourself();
        
          TGeoVolumeAssembly* SubunitVol = new TGeoVolumeAssembly("TTVol");
        
          TGeoVolumeAssembly* SubunitDouble = new TGeoVolumeAssembly("TTDouble");
        
          SubunitDouble->AddNode(BoxVolDouble1,0,trc1);
          SubunitDouble->AddNode(BoxVolDouble2,0,trc2);
        
          TGeoVolumeAssembly* SubunitSingle = new TGeoVolumeAssembly("TTSingle");
        
          SubunitSingle->AddNode(BoxVolSingle3a,0,trc3a);
          SubunitSingle->AddNode(BoxVolSingle3b,0,trc3b);
          SubunitSingle->AddNode(BoxVolSingle4a,0,trc4a);
          SubunitSingle->AddNode(BoxVolSingle4b,0,trc4b);
         
          SubunitVol->AddNode(SubunitDouble,0,new TGeoCombiTrans());
          SubunitVol->AddNode(SubunitSingle,0,new TGeoCombiTrans());
        
          top->AddNode(SubunitVol,0,new TGeoCombiTrans());
        
          gGeoMan->CloseGeometry();
    gGeoMan->Export(outfile.Data());
          //top->Write();
          //fi->Close();
          //gGeoManager->Export(outfile);
          //top->Draw("ogl");
}